On this page (5 sections)
The kitchen is usually the most expensive room per square metre to renovate, because it combines carpentry, countertops, tiling, plumbing, and electrical in one tight space. If you are pricing a kitchen renovation Singapore project, knowing which elements drive the cost helps you spend where it matters.
A kitchen also has to work hard daily, so durability and layout matter more than in any other room. The cheapest specification rarely lasts in a space that sees heat, water, and constant use.
Cabinetry is the biggest line
Kitchen cabinetry typically takes the largest share of the budget. Cost scales with the run length, the carcass material, the door finish, and the hardware. Plywood carcasses resist moisture better than particleboard, which matters under sinks and near the hob, while laminate doors balance durability and cost against pricier spray finishes.
Adex provides carpentry services in Singapore for kitchen cabinetry and coordinates the plumbing and flooring that go with it.
Countertops and backsplash
Countertop material is the next major decision. Quartz and sintered stone are popular for durability and low maintenance, while solid surfaces and laminate sit lower in cost. The backsplash and wall tiling add to the total, especially if old tiles must be hacked off first.
Plumbing, electrical, and layout changes
Keeping the sink, hob, and drainage roughly where they are keeps costs down. Moving them means new plumbing runs, drainage falls, and electrical points, all of which add cost and time. A layout change can transform a kitchen, but it is one of the bigger cost drivers, so weigh it deliberately.
Where budgets blow out
Overruns usually come from upgrading countertop or appliance specifications mid-project, relocating services, and discovering issues behind old cabinetry such as leaks or damaged walls. Settle the layout and material grade before work starts, and inspect for hidden damp before closing up.
Bottom line
Kitchen renovation cost in Singapore is led by cabinetry, countertops, and any service relocation. Invest in a moisture-resistant carcass and durable surfaces, keep the layout efficient, and lock specifications early to keep the budget honest.
Need a contractor?
Get advice for your project
Send us your property type, photos, and preferred timeline. We'll recommend the next step and prepare a clear quotation.
